تجارة التجزئة عالية درجة الحرارة كاشف قضيب نادي بار

retail high temperature abrasive ceramic rod club bar

Reputation depends on quality, quality comes from Hard!

Alumina Ceramic :

Alumina ceramic dry press forming technology is limited to articles with a simple shape and an inner wall thickness of more than 1 mm and a length to diameter ratio of not more than 4:1. The forming method is uniaxial or Machinable Ceramic Bushing bidirectional. The press is available in hydraulic or mechanical form and Macor Ceramics can be semi-automatic or fully automatic. The maximum pressure of the press is 200Mpa. The output can reach 15 to 50 pieces per minute. Since the hydraulic press has a uniform stroke pressure, the height of the pressed parts is different when there is a difference in the filling of the powder.

High hardness, high strength, wear resistance, corrosion resistance, high temperacture (1600 ° ), good thermal diffusivity, good insulativity, low cost etc.

Data Sheet↓

Thermal Shock Resistance: 200 △T°C

Maximum use temperature 1650°C

Dielectric Strength: ＞10 KV/mm

Dielectric Constant: 9.1er

Dielectric Loss Angle(1MHz): 0.0002-0.0003

Volume Resistivity(20°C): ＞1014Ω.cm

Company Information :

Shenzhen Hard Precision Ceramic CO.,Ltd founded in 2007, located in Shenzhen of China. We are a company that integrates development, design, molding, sintering, production and sales of precision ceramic products. After 10 years of development, we have cooperated with more than 2000 customers and 60 universities; Our factory covers an area of 2000 square meters, 50 employees, and annual production value of nearly 20 million. We have a higher visibility and better reputation in the same industry.Our products include ceramic rods, tubes, plates, blocks and precision parts for industrial. We have all-line high precision equipments from ceramic forming, sintering to precision machining. Hope for a wide range of sincere cooperation with customers at home and abroad.

7.MOQ is not limited, small quantity is welcome.

8.Vigorous team and good after-sales service

Products Show

Factory Show

فريقنا

التعليمات

س: هل أنت شركة تداول أو الشركة المصنعة؟
ج: نحن مصنع.

س: ما هي مدة وقت التسليم؟
ج: عمومًا هو 5-10 أيام إذا كانت البضائع في المخزون. or it is 15-30 days if the goods are not in stock, it is according to quantity.

س: هل تقدم عينات؟ هل هو مجاني أم إضافي؟
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
س: ما هي شروط الدفع الخاصة بك؟

ج: الدفع <= 1000usd ، 100 ٪ مقدما. Payment>=1000USD, 50% T/T in advance ,balance before shippment.

فئة المنتج : سيراميك الألومينا > الألومينا السيراميك دبوس